Heatstrip Design 3200 Watt

Heatstrip Design 3200W

The Heatstrip Design outdoor and indoor patio heater is stylish with a sleek look. For outdoor use, it is recommended to place the heater under a roof to prevent heat loss. The patio heater is suitable for restaurants, clubs, or outdoor dining year-round.

With this patio heater, you can heat an open outdoor area of 5.3 sqm, an enclosed outdoor area of 6.4 sqm, and an indoor area of approximately 8 sqm.

Highlighted Features

• Quality aluminum construction.
• Easy DIY installation.
• Multiple mounting options.
• The black radiation panel emits no red glow.
• The heater reaches at least 350 degrees.
• IP55 waterproof rating.
• Requires 13.5 amperes.

Included in the Package

• Heatstrip Design 3200W.
• 100 cm power cord.
• Standard grey mounting brackets.

Installation

The Design patio heater is easy and quick to install with the included brackets, which can be used for both ceiling and wall mounting. The bracket is flexible and can be tilted up to 45 degrees. If multiple units are desired, they can be placed end-to-end.

This Heatstrip Design patio heater includes a one-meter cord. The Heatstrip Design 1500 and 2400 models come with a plug and can be connected directly to a socket. The 3200W model does not come with a plug and must be installed by an electrician.

Note: This patio heater must be installed by an electrician.

Mounting Heights Including Brackets

• Minimum mounting height: 2.1 m above ground.
• Maximum mounting height: 3 m above ground.
• Recommended mounting height: 2.5 m above ground.

Note: Chains and extension rods for suspension are additional purchases.

Operation

The Design 3200 is turned on/off via the connected switch/socket. Alternatively, a remote control can be purchased:

• Remote control with on/off function and timer intervals: 1, 2, and 4 hours.
• Remote control with on/off function, timer intervals: 1, 2, and 4 hours, and 3 heat settings