Foco Room Divider 1100 Medium

Foco Room Divider 1100 Medium built-in bioethanol fireplace

Foco Room Divider 1100 Medium is a 3-sided bioethanol fireplace on 110 cm in the width. The fireplace is designed to be built into a wall, where the flames can be seen from the front. Although the name of the fireplace can be a bit confusing, it is actually very simple.

This fireplace is a part of our models called Foco, which are budget friendly bioethanol fireplaces for built-in.

Room Divider means, that it is a 3-sided bioethanol fireplace, and works as a room divider between two rooms.

1100 is the width on the fireplace in millimeters.

Medium refers to the depth on the fireplace. In the medium version, has the Foco fireplace a depth on 30 cm. Which means, that this fireplace requires a wall on 30 cm deep.

Bioethanol burner

The Foco Room Divider 1100 Medium comes with a manual bioethanol burner. You can read more about the burner here:

• Superior Manual 1000 - up to 6 hours of burn time on a full fill

Materials

Foco Room Divider 1100 Medium is made of 4 mm thick stainless steel, which has been powder coated black. This gives the bioethanol fireplace a neutral and timeless design, that lets the flames be in focus.

Further more includes Foco Room Divider tempered glass, as must be placed on each sides in front of the flames. In case you want more shielded flames, it is possible to get one side with full glass - this is often seen in families with small children. In addition, the glass will also shield the flames from draft and small gusts of wind, which helps to provide a more stable flame. However, it is possible not to mount the glass, if desired.

The package includes

• Bioethanol burner
• Foco Room Divider 1100 Medium frame - assembled from the factory
• 3x tempered glass (Height 10 cm)
• 6x glass holders

Installation of Foco Room Divider 1100 Medium

The installation of a Foco Room Divider 1100 Medium is relatively easy, if you have a little bit technical knowledge and it requires no special certification. You can therefore do the installation by yourself.

The frame is delivered assembled from the factory and is therefore ready to be installed in the wall, when you receive it.

If you mount the fireplace into a flammable wall, you must heat-insulate between the fireplace and the wall. For this, we recommend that you use materials as Skamotec fire boards, Fermacell fire boards or high temperature plasterboards.