2.5 Litre Outdoor Superior Burner - W: 45 cm

Outdoor Superior Bioethanol Burner 2.5 L

The Outdoor Superior 2.5 L is a manual bioethanol burner designed for built-in fireplace projects. With a width of 45 cm and a 2.5 litre capacity, the burner provides up to approximately 7.5 hours of burning time per filling, depending on the flame setting and conditions.

The burner has an integrated lip around the top, allowing it to rest securely on the surrounding construction when installed. The required cut-out is approximately 42.5 × 13.5 cm (W × D). The opening must be large enough for the body of the burner to pass through while remaining smaller than the supporting lip.

The flame is manually adjustable, allowing you to regulate the flame size and heat output. At maximum output, the burner provides up to 2.4 kW of heat and consumes approximately 0.33 litres of bioethanol per hour. No electricity, chimney or fixed flue is required.

Indoor and outdoor use

The burner can be used for both indoor and outdoor fireplace projects. When used indoors, the recommended minimum room volume is 60 m³. This corresponds to approximately 25 m² of floor space with a ceiling height of 2.4 metres. The conversion is only a guide, as the actual floor area depends on the ceiling height.

Bioethanol burns without producing soot or smoke under normal use, which makes the burner relatively straightforward to clean and maintain. As it uses real flames, it must always be installed in suitable heat-resistant, non-combustible surroundings and in accordance with the installation instructions and specified safety distances.

Highlighted features

• Manual bioethanol burner for built-in projects
• Suitable for indoor and outdoor use
• 2.5 litre fuel capacity
• Up to approximately 7.5 hours of burning time
• Adjustable flame
• Maximum heat output of 2.4 kW
• Approximately 26 cm flame width
• Integrated lip for built-in installation
• No electricity required
• No chimney or fixed flue required
• Extinguishing tool included

Installation

The burner measures 45 × 16 × 8 cm (W × D × H) and is intended to be recessed into a suitable surrounding construction. The integrated top lip supports the burner around the edge of the cut-out. Materials directly surrounding the burner or exposed to heat and flames must be suitable heat-resistant, non-combustible materials.

Before building the burner into a custom project, follow the installation instructions carefully, including the specified safety distances and requirements for materials and ventilation. The burner must remain accessible so it can be operated, refilled and removed when necessary.